top of page
Gulfdrip_product-1001.png

Cyclone PC Line

Pressure Compensating Dripline

With a Flat Emitter

Cyclone PC Cylindrical Coil
Cyclone PC Flat Coil

Cyclone PC Line Specifications


Cyclone PC Line is produced with the highest quality raw material, in state-of-the-art production lines by integrating the most advanced laser welded emitter of the industry. Provides extreme tensile strength, since it is produced with high-quality resins. Offers excellent performance on the field due to the flawlessly designed, injected molded Cyclone PC emitter with very low CV. The unique design of Cyclone PC emitter, provides high clogging resistance and offers the highest emission uniformity. The combination of those elements translates to superior quality, evenly grown crops and increased overall yield which leads to higher income for every farmer worldwide.​

Laser Welding Technology

Cyclone PC emitter is welded using state of the art laser technology. The particular emitter assembly procedure, ensures flawless operation of the dripline under any condition. Moreover, this advanced welding method prevents leaks in the event of extremely high pressure or the opening of the emitter during installation and retraction of the dripline in the field.
 

​

Drain (D), Non-Drain (ND) and Anti-Siphon (AS) options
The anti-siphon (AS) system both in D and ND versions is a specially designed mechanism that prevents suction of dirt and impurities into the emitter. The AS feature enables Cyclone PC Line to be installed underground (SDI), perfectly maintaining its irrigation characteristics and its multiyear durability. With the Non-drain system, the dripline remains full of water during irrigation intervals, ensuring immediate and uniform irrigation along the dripline. Moreover, Non-Drain emitters eliminate drainage and refill effect, and improve efficiency in pulse irrigation. In order to achieve the Non-Drain function, the emitter opens at 0,40 bar and closes at 0,25 bar.

Cyclone PC Emitter
fasa_Product_010_large.tif

    Product Characteristics

  • Available in 16 and 22mm diameter, from 15mil up to 35mil wall thickness that enables both surface and subsurface installations for multi-seasonal use, depending on wall thickness

  • Wide range of flow rates 1,0 / 1,5 / 2,0 / 2,4 and 3,8 lph for a wide range of irrigation needs​

  • Pressure compensating (PC) emitters incorporate a silicone membrane which enables the delivery of precise and equal amounts of water over a broad pressure range

  • Available in Drain (D), Non-Drain (ND) and Anti Siphon (AS) options for every possible installation both on surface and subsurface

  • Excellent Coefficient of Variation, lower than similar products due to the excellent emitter design and their production on state-of-the-art injection machines

  • Advanced water inlet design, increases filtering area and prevents particle insertion in the emitter, thus enhancing the anticlogging performance

  • Specially designed labyrinth creates high turbulent flow, therefore preventing clogging of the emitter 

  • Emitters are tested from both CIT and Irstea institutes and achieved the highest ranking for CV, emission uniformity, flow accuracy and clogging resistance

bottom of page